Article: HF9-DOL-24VDC

Article: HF9-DOL-24VDC
HF9-DOL Electronic Compact Starter 24 VDC
We find the right product
for you
Official reseller
Expert engineering support
Configuration
General Information | |
Extended Product Type: | HF9-DOL-24VDC |
Product ID: | 1SAT142000R1011 |
EAN: | 4013614515590 |
Catalog Description: | HF9-DOL Electronic Compact Starter 24 VDC |
Long Description: | The HF-DOL-range is used for the direct-on-line start of motors and the switching of non-resistive loads. With contactor and overload relay functionalities integrated into one device, the results are faster wiring times and fewer faults. The range covers 0.6 A, 2.4 A and up to 9 A - for motors up to 3 kW – 500 V AC. The integrated electronic overload protection has a wide setting range that enables just three models to cover all requirements. Setting range of HF9-DOL-24VDC is 1.5 A to 9 A. The control supply voltage is 24 V DC. For the control and main connection points ABB offers screwconnections. ABB also offers a HF-DOLE safety range with emergency stop function. This offers Safety Integrity Level 3 in accordance with functional safety standard IEC 61508-1 and Performance Level 'e' in accordance with ISO 13849-1. The safety range is ATEX-certified. |
| |
Standards: | IEC/EN 60947-1 |
IEC/EN 60947-4-2 | |
UL 60947-1 | |
UL 60947-4-2 | |
Product Name: | Electronic Starter |
Function: | Direct-on-line starter with overload protection |
Reset Function: | Push Button |
Rated Operational Voltage: | Main Circuit 500 V AC |
Operational Voltage: | Maximum 550 V AC |
Minimum 42 V AC | |
Rated Insulation Voltage (Ui): | 500 V |
Rated Control Supply Voltage (Us): | 24 V DC |
Rated Impulse Withstand Voltage (Uimp): | Main Circuit 6 kV |
Rated Control Circuit Voltage (Uc): | DC Operation 24 V DC |
Rated Uninterrupted Current (Iu): | 9 A |
Rated Frequency (f): | Main Circuit 50 Hz |
Main Circuit 60 Hz | |
Power Loss: | Maximum 14.6 W |
Minimum 1.1 W | |
Overload Protection: | Electronic overload protection |
Electrical Durability: | 30000000 cycle |
Mechanical Durability: | 10000 cycle |
Number of Poles: | 3 |
Number of Protected Poles: | 3 |
Number of Phases: | 3 |
Number of Main Contacts NO: | 3 |
Number of Auxiliary Contacts CO (SPDT): | 1 |
Overvoltage Category: | III |
Tightening Torque: | Control Circuit 0.5 ... 0.6 N·m |
Main Circuit 0.5 ... 0.6 N·m | |
Trip Class: | class 10A |
Delay Time (?): | Off, Maximum, Switched Off via Supply Voltage 500 ms |
Off, Typical, Switched Off via Control Input Voltage 30 ms | |
Off, Typical, Switched Off via Supply Voltage 25 ms | |
Off, Maximum, Switched Off with Pushbutton 3 second [unit of time] | |
Off, Minimum, Switched Off with Pushbutton 0.5 second [unit of time] | |
Response Time: | Phase Asymmetry 33% 120 second [unit of time] |
Phase Asymmetry 67% 1.8 second [unit of time] | |
Phase Failure 1.8 second [unit of time] | |
Phase Loss Sensitive: | Yes |
Mounting on DIN Rail: | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715 |
TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715 | |
Mounting Position: | Position 1 |
Recommended Screw Driver: | Control Circuit M3 |
Main Circuit M3 | |
Connecting Capacity Main Circuit: | Flexible with Ferrule 1x 2 ... 2.5 mm² |
Flexible 1x 2 ... 2.5 mm² | |
Rigid 1x 2 ... 2.5 mm² | |
Wire Stripping Length: | Control Circuit 8 mm |
Main Circuit 8 mm | |
Terminal Type: | Screw Terminals |
| |
Ambient Air Temperature: | Operation -25 ... +70 °C |
Operation Compensated -40 ... + 80 °C | |
Degree of Protection: | Housing IP20 |
Main Circuit Terminals IP20 | |
Pollution Degree: | 2 |
Maximum Operating Altitude Permissible: | Without Derating 2000 m |
RoHS Status: | Following EU Directive 2011/65/EU |
Technical UL/CSA | |
Maximum Operating Voltage UL/CSA: | Main Circuit 500 V AC |
Ampere Rating UL/CSA: | 6.5 A |
Short-Circuit Current Rating (SCCR): | (500 V AC, 30 A Class J or CC) 100 kA |
Horsepower Rating UL/CSA: | Nominal Switching Performance Full Load (power factor = 0.4) 3 Hp |
Nominal Switching Performance Full Load (power factor = 0.8) 6.1 Hp | |
Connecting Capacity Control Circuit UL/CSA: | Flexible with Ferrule 1x 24 ... 14 AWG |
Flexible 16-8 AWG | |
Solid 1x 24 ... 14 AWG | |
Connecting Capacity Main Circuit UL/CSA: | Flexible with Ferrule 1x 24 ... 14 AWG |
Flexible 1x 24 ... 14 AWG | |
Solid 1x 24 ... 14 AWG | |
Tightening Torque UL/CSA: | Control Circuit 5 ... 7 in·lb |
Main Circuit 5 ... 7 in·lb | |
| |
Product Net Width: | 22.5 mm |
Product Net Height: | 99 mm |
Product Net Depth / Length: | 114.5 mm |
Product Net Weight: | 0.206 kg |
| |
Package Level 1 Units: | 1 piece |
Package Level 1 Width: | 150 mm |
Package Level 1 Height: | 34 mm |
Package Level 1 Depth / Length: | 115 mm |
Package Level 1 Gross Weight: | 0.306 kg |
Package Level 1 EAN: | 4013614515590 |
| |
Minimum Order Quantity: | 1 piece |
Customs Tariff Number: | 85371098 |
E-Number (Finland): | 3707542 |
E-Number (Sweden): | 3210490 |
Country of Origin: | Germany (DE) |
Selling Unit of Measure: | piece |
| |
cUL Certificate: | cUL E191658 |
Declaration of Conformity - CCC: | 2020970304003456 |
Declaration of Conformity - CE: | 1SAD038501-0195 |
Declaration of Conformity - UKCA: | 1SAD938500-1195 |
EAC Certificate: | 1SAA918001-2701 |
Instructions and Manuals: | 2CDC130014M0401 |
2CDC130009M0401 | |
2CDC130013M0401 | |
2CDC130007M0401 | |
2CDC130015M0401 | |
RoHS Information: | 1SAD038501-0195 |
Popular Downloads | |
Instructions and Manuals: | 2CDC130014M0401 |
2CDC130009M0401 | |
2CDC130013M0401 | |
2CDC130007M0401 | |
2CDC130015M0401 | |
Dimension Diagram: | 1SAT100401F0001 |
| |
ETIM 6: | EC001037 - Motor starter/Motor starter combination |
ETIM 7: | EC001037 - Motor starter/Motor starter combination |
ETIM 8: | EC001037 - Motor starter/Motor starter combination |
EPLAN Catalog Tree: | Electrical engineering / Relays, contactors / General |
WEEE Category: | 5. Small Equipment (No External Dimension More Than 50 cm) |
WEEE B2C / B2B: | Business To Business |
CN8: | 8537 10 98 |
UNSPSC: | 39121521 |
eClass: | V11.0 : 27370905 |
IDEA Granular Category Code (IGCC): | 4727 >> Motor starter controls |