Article: K656DLR-N0410-S
Article: K656DLR-N0410-S
15/25KV 600A DB ELBO DTST TP N0410S
We find the right product
for you
Official reseller
Expert engineering support
Configuration
General Information | |
| Extended Product Type: | K656DLR-N0410-S |
| Product ID: | 7TAA122250R0029 |
| EAN: | 0075114402637 |
| Catalog Description: | 15/25KV 600A DB ELBO DTST TP N0410S |
| Long Description: | 600 Amp, 15/25kV, 600 Series Deadbreak Direct Test Elbow with Test Point, (with Insulated Plug, Cap, Stud, Lug and Cable Adapter), Aluminum Compression Lug. Cable Insulation Diameter 1.515 inch to 1.780 inch. Conductor Size kcmil Compressed Stranded 1000. Cold Shrinkable Jacket Seal. |
| |
| EAN: | 0075114402637 |
| UPC: | 075114402637 |
| |
| Product Net Weight: | 1 lb |
| 453.515 g | |
| |
| Package Level 2 Units: | 1 piece |
| Package Level 2 Width: | 10.5 in |
| 267 mm | |
| Package Level 2 Height: | 4.38 in |
| 111 mm | |
| Package Level 2 Depth / Length: | 13.25 in |
| 337 mm | |
| |
| Application: | 15/25kV, 600 Amps |
| Brand / Label: | Elastimold |
| Color: | Black |
| Connection Type: | Compression |
| Current Rating: | 600 A |
| Includes: | 1 Elbow Housing, 1 Compression Lug, 1 Stud, 1 Insulated Plug with Cap, 3 Tubes Lubricant, 1 Cable adapter, 1 Crimp Chart, Installation Instruction Sheets |
| Insulation Material: | Yes EPDM Rubber |
| Material: | Housing - EPDM Rubber |
| Number of Batteries: | 0 |
| Product Main Type: | ELASTIMOLD 600A SEPARABLE CONNECTORS |
| Product Name: | ELECTRICAL CONNECTOR,>1000V |
| Product Type: | Deadbreak Direct Test Elbow with Test Point |
| Size: | Width 10.36 inch x Length 13.00 inch from Center of Bushing Insert to T-Body Bottom. |
| Special Functions: | Cold Shrinkable jacket Seal. Fully shielded, fully submersible molded rubber housing. 100 Percent peroxide-cured construction includes insulation and conductive EPDM materials. Can be easily connected or disconnected using standard hand tools and equipment in a de-energized state. Optional accessories allow visible external separation, by-pass, isolation, dead-ending, grounding, and testing as well as adding taps, surge arrestors, and fault current indicators. Direct conductor test point equipped elbow. |
| Standards: | ANSI/IEEE Standard 386 |
| Temperature Range: | -40 to +65 °C |
| Voltage Rating: | 15 to 25 kV |
| |
| Data Sheet, Technical Information: | K656DLR-N0410-S |
| Instructions and Manuals: | K656DLR-N0410-S |
| |
| UNSPSC: | 39121421 |
| IDEA Granular Category Code (IGCC): | 4586 >> Electrical connector assembly |