Article: HF0.6-ROL-24VDC
Article: HF0.6-ROL-24VDC
HF0.6-ROL Electronic Compact Starter 24 VDC
We find the right product
for you
Official reseller
Expert engineering support
Configuration
General Information | |
| Extended Product Type: | HF0.6-ROL-24VDC |
| Product ID: | 1SAT115000R1011 |
| EAN: | 4013614515545 |
| Catalog Description: | HF0.6-ROL Electronic Compact Starter 24 VDC |
| Long Description: | The HF-ROL-range is used for forward and reverse running motors, as well as for switching non resistive loads. With contactor and overload relay functionalities integrated into one device, the results are faster wiring times and fewer faults. The range covers 0.6 A, 2.4 A and up to 9 A - for motors up to 3 kW – 500 V AC. The integrated electronic overload protection has a wide setting range that enables just three models to cover all requirements. Setting range of HF0.6-ROL-24VDC is 0.075 A to 0.6 A. The control supply voltage is 24 V DC. For the control and main connection points ABB offers screw connections. ABB also offers a HF-ROLE safety range with emergency stop function. This offers Safety Integrity Level 3, in accordance with functional safety standard IEC 61508-1 and Performance Level 'e' in accordance with ISO 13849-1. The safety range is ATEX-certified. |
| |
| Standards: | IEC/EN 60947-1 |
| IEC/EN 60947-4-2 | |
| UL 60947-1 | |
| UL 60947-4-2 | |
| Product Name: | Electronic Starter |
| Function: | Reversed-on-line starter with overload protection |
| Reset Function: | Push Button |
| Rated Operational Voltage: | Main Circuit 500 V AC |
| Operational Voltage: | Maximum 550 V AC |
| Minimum 42 V AC | |
| Rated Insulation Voltage (Ui): | 500 V |
| Rated Control Supply Voltage (Us): | 24 V DC |
| Rated Impulse Withstand Voltage (Uimp): | Main Circuit 6 kV |
| Rated Control Circuit Voltage (Uc): | DC Operation 24 V DC |
| Rated Uninterrupted Current (Iu): | 0.6 A |
| Rated Frequency (f): | Main Circuit 50 Hz |
| Main Circuit 60 Hz | |
| Power Loss: | Maximum 1.5 W |
| Minimum 1.1 W | |
| Overload Protection: | Electronic overload protection |
| Electrical Durability: | 30000000 cycle |
| Mechanical Durability: | 10000 cycle |
| Number of Poles: | 3 |
| Number of Protected Poles: | 3 |
| Number of Phases: | 3 |
| Number of Main Contacts NO: | 3 |
| Number of Auxiliary Contacts CO (SPDT): | 1 |
| Overvoltage Category: | III |
| Tightening Torque: | Control Circuit 0.5 ... 0.6 N·m |
| Main Circuit 0.5 ... 0.6 N·m | |
| Trip Class: | class 10A |
| Delay Time (?): | Off, Maximum, Switched Off via Supply Voltage 500 ms |
| Off, Typical, Switched Off via Control Input Voltage 30 ms | |
| Off, Typical, Switched Off via Supply Voltage 25 ms | |
| Off, Maximum, Switched Off with Pushbutton 3 second [unit of time] | |
| Off, Minimum, Switched Off with Pushbutton 0.5 second [unit of time] | |
| Response Time: | Phase Asymmetry 33% 120 second [unit of time] |
| Phase Asymmetry 67% 1.8 second [unit of time] | |
| Phase Failure 1.8 second [unit of time] | |
| Phase Loss Sensitive: | Yes |
| Mounting on DIN Rail: | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715 |
| TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715 | |
| Mounting Position: | Position 1 |
| Recommended Screw Driver: | Control Circuit M3 |
| Main Circuit M3 | |
| Connecting Capacity Main Circuit: | Flexible with Ferrule 1x 2 ... 2.5 mm² |
| Flexible 1x 2 ... 2.5 mm² | |
| Rigid 1x 2 ... 2.5 mm² | |
| Wire Stripping Length: | Control Circuit 8 mm |
| Main Circuit 8 mm | |
| Terminal Type: | Screw Terminals |
| |
| Ambient Air Temperature: | Operation -25 ... +70 °C |
| Operation Compensated -40 ... + 80 °C | |
| Degree of Protection: | Housing IP20 |
| Main Circuit Terminals IP20 | |
| Pollution Degree: | 2 |
| Maximum Operating Altitude Permissible: | Without Derating 2000 m |
| RoHS Status: | Following EU Directive 2011/65/EU |
| Technical UL/CSA | |
| Maximum Operating Voltage UL/CSA: | Main Circuit 500 V AC |
| Ampere Rating UL/CSA: | 0.6 A |
| Short-Circuit Current Rating (SCCR): | (500 V AC, 30 A Class J or CC) 100 kA |
| Horsepower Rating UL/CSA: | Nominal Switching Performance Full Load (power factor = 0.4) 0.4 Hp |
| Nominal Switching Performance Full Load (power factor = 0.8) 0.6 Hp | |
| Connecting Capacity Control Circuit UL/CSA: | Flexible with Ferrule 1x 24 ... 14 AWG |
| Flexible 16-8 AWG | |
| Solid 1x 24 ... 14 AWG | |
| Connecting Capacity Main Circuit UL/CSA: | Flexible with Ferrule 1x 24 ... 14 AWG |
| Flexible 1x 24 ... 14 AWG | |
| Solid 1x 24 ... 14 AWG | |
| Tightening Torque UL/CSA: | Control Circuit 5 ... 7 in·lb |
| Main Circuit 5 ... 7 in·lb | |
| |
| Product Net Width: | 22.5 mm |
| Product Net Height: | 99 mm |
| Product Net Depth / Length: | 114.5 mm |
| Product Net Weight: | 0.217 kg |
| |
| Package Level 1 Units: | 1 piece |
| Package Level 1 Width: | 150 mm |
| Package Level 1 Height: | 34 mm |
| Package Level 1 Depth / Length: | 115 mm |
| Package Level 1 Gross Weight: | 0.317 kg |
| Package Level 1 EAN: | 4013614515545 |
| |
| Minimum Order Quantity: | 1 piece |
| Customs Tariff Number: | 85371098 |
| E-Number (Finland): | 3707547 |
| E-Number (Sweden): | 3210495 |
| Country of Origin: | Germany (DE) |
| Selling Unit of Measure: | piece |
| |
| cUL Certificate: | cUL E191658 |
| Declaration of Conformity - CCC: | 2020970304003456 |
| Declaration of Conformity - CE: | 1SAD038501-0195 |
| Declaration of Conformity - UKCA: | 1SAD938500-1195 |
| EAC Certificate: | 1SAA918001-2701 |
| Instructions and Manuals: | 2CDC130014M0401 |
| 2CDC130009M0401 | |
| 2CDC130013M0401 | |
| 2CDC130007M0401 | |
| 2CDC130015M0401 | |
| RoHS Information: | 1SAD038501-0195 |
| Popular Downloads | |
| Instructions and Manuals: | 2CDC130014M0401 |
| 2CDC130009M0401 | |
| 2CDC130013M0401 | |
| 2CDC130007M0401 | |
| 2CDC130015M0401 | |
| Dimension Diagram: | 1SAT100401F0001 |
| |
| ETIM 6: | EC001037 - Motor starter/Motor starter combination |
| ETIM 7: | EC001037 - Motor starter/Motor starter combination |
| ETIM 8: | EC001037 - Motor starter/Motor starter combination |
| EPLAN Catalog Tree: | Electrical engineering / Relays, contactors / General |
| WEEE Category: | 5. Small Equipment (No External Dimension More Than 50 cm) |
| WEEE B2C / B2B: | Business To Business |
| CN8: | 8537 10 98 |
| UNSPSC: | 39121521 |
| eClass: | V11.0 : 27370905 |
| IDEA Granular Category Code (IGCC): | 4727 >> Motor starter controls |