Article: 262LRJS-E5270
We find the right product
for you
Official reseller
Expert engineering support
Configuration
General Information | |
| Extended Product Type: | 262LRJS-E5270 |
| Product ID: | 7TAA121260R0074 |
| EAN: | 0075114309530 |
| Catalog Description: | 25KV ELBOW 200A LB JACKET SEAL |
| Long Description: | 25kV, 200 Amps, Loadbreak Elbow, Built in Jacket Seal, Cable Insulation Diameter 1.090-1.310 inches, (27.69-33.27 mm), Bi-Metal Conductor, Conductor Size 4/0 Stranded/Compressed, 250 Solid/Compact. With Test Point. Kit Contains Elbow Connector Housing, Compression Lug, Probe, Probe Wrench, Lubricant, Installion Instruction Sheet and Crimp Chart. |
| |
| EAN: | 0075114309530 |
| |
| Package Level 1 Units: | 1 piece |
| Package Level 1 Width: | 19.12 in |
| 486 mm | |
| Package Level 1 Height: | 12.5 in |
| 318 mm | |
| Package Level 1 Depth / Length: | 10.5 in |
| 267 mm | |
| |
| Application: | 25kV, 200 Amp, Loadbreak Connector |
| Brand / Label: | Elastimold |
| Color: | Black |
| Connection Type: | Push-In |
| Current Rating: | 200 A |
| Effective Date: | 20161103 |
| Environmental Conditions: | All Weatheronditions °C |
| Includes: | 1 Elbow Connector Housing, 1 Compression Lug, 1 Probe, 1 Probe Wrench, 1 Tube of Lubricant, 1 V.D. Cap-Peroxide, Crimp Chart and Installation Instructions. |
| Insulation Material: | Yes, EPDM Rubber |
| Material: | Housing - EPDM Rubber |
| Number of Batteries: | 0 |
| Product Name: | ELECTRICAL CONNECTOR,>1000V |
| Product Type: | Loadbreak Elbow Connector with Test Point and Jacket Seal |
| Size: | 8.20 inch X 11.47 inch from bottom to center of Installation O-Ring, 2.86 inch Diameter |
| Special Functions: | 25kV, 200 Amp Loadbreak Elbow. Fully shielded, fully submersible molded rubber housing. 100 percent peroxide-cured construction includes insulation and conductive EPDM materials. Provision for hot stick operation. Provision for ground wire connection. Wide cable range with minimum number of sizes. Long bi-metal compression lug is standard. Non-corrosive capacitive test point. Built in Cable Jacket Seal. |
| Standards: | ANSI/IEEE Standard 386 |
| Temperature Range: | -40 to +65 °C |
| UPC: | 075114309530 |
| Voltage Rating: | 28 kV |
| |
| Data Sheet, Technical Information: | 262LRJS-E5270 |
| Instructions and Manuals: | 262LRJS-E5270 |
| |
| UNSPSC: | 39121421 |
| WEEE Category: | Product Not in WEEE Scope |
| IDEA Granular Category Code (IGCC): | 4586 >> Electrical connector assembly |