Article: NL22ERT 24V DC
We find the right product
for you
Official reseller
Expert engineering support
Configuration
General Information | |
| Extended Product Type: | NL22ERT 24V DC |
| Product ID: | 1SBH143010R8122 |
| EAN: | 3471522361813 |
| Catalog Description: | NL22ERT 24V DC Contactor Relay |
| Long Description: | NL... contactor relays are used for switching auxiliary circuits and control circuits - Poles: 4-pole contactor relays (mechanically linked contact elements available) - Control circuit: DC operated with solid core magnet circuit. The polarity on the coil terminals (A1+ and A2-) must be respected - Accessories: a wide range of accessories is available NL... contactors are fitted with low consumption DC coils and are suitable for a direct control by PLC outputs. |
| |
| Minimum Order Quantity: | 1 piece |
| Customs Tariff Number: | 85364900 |
| Popular Downloads | |
| Data Sheet, Technical Information: | 1SBC101032D0201 |
| Instructions and Manuals: | 1SBC101006M5501 |
| Dimension Diagram: | FPTE307902 |
| |
| Product Net Width: | 44 mm |
| Product Net Depth / Length: | 97 mm |
| Product Net Height: | 78 mm |
| Product Net Weight: | 0.52 kg |
| |
| Number of Main Contacts NO: | 0 |
| Number of Main Contacts NC: | 0 |
| Number of Auxiliary Contacts NO: | 2 |
| Number of Auxiliary Contacts NC: | 2 |
| Rated Operational Voltage: | Auxiliary Circuit 690 V |
| Main Circuit 690 V | |
| Rated Frequency (f): | Supply Circuit 50 / 60 Hz |
| Conventional Free-air Thermal Current (Ith): | acc. to IEC 60947-5-1, q = 40 °C 16 A |
| Rated Operational Current AC-15 (Ie): | (500 V) 2 A |
| (690 V) 2 A | |
| (24 / 127 V) 6 A | |
| (220 / 240 V) 4 A | |
| (380 / 400 V) 3 A | |
| Short-Circuit Protective Devices: | Auxiliary Circuit - gG Type Fuses 10 A |
| Maximum Electrical Switching Frequency: | 1200 cycles per hour |
| Rated Operational Current DC-13 (Ie): | (24 V) 6 / 144 A |
| (48 V) 2.8 / 134 A | |
| (72 V) 1 / 72 A | |
| (125 V) 0.55 / 69 A | |
| (250 V) 0.3 / 75 A | |
| Rated Insulation Voltage (Ui): | acc. to IEC 60947-5-1 and VDE 0110 (Gr. C) 690 V |
| acc. to UL/CSA 600 V | |
| Rated Impulse Withstand Voltage (Uimp): | 6 kV |
| Mechanical Durability: | > 20 million |
| Maximum Mechanical Switching Frequency: | 6000 cycles per hour |
| Rated Control Circuit Voltage (Uc): | DC Operation 24 V |
| Coil Consumption: | Average Holding Value, from Warm State 3 W |
| Average Pull-in Value, from Cold State 3 W | |
| Operate Time: | Between Coil De-energization and NC Contact Closing 16 ... 27 ms |
| Between Coil De-energization and NO Contact Opening 10 ... 17 ms | |
| Between Coil Energization and NC Contact Opening 20 ... 70 ms | |
| Between Coil Energization and NO Contact Closing 50 ... 100 ms | |
| Connecting Capacity Auxiliary Circuit: | Rigid or Flexible with Cable Lug 0.75 ... 2.5 mm² |
| Degree of Protection: | acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP10 |
| Terminal Type: | Ring-Tongue Terminals |
| |
| Ambient Air Temperature: | Close to Contactor for Storage -60 ... +80 °C |
| Near Contactor for Operation in Free Air (0.85 ... 1.1 Uc) -40 ... +55 °C | |
| Near Contactor for Operation in Free Air (Uc) +55 ... +70 °C | |
| Climatic Withstand: | acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II |
| Maximum Operating Altitude Permissible: | 3000 m |
| Resistance to Shock acc. to IEC 60068-2-27: | Half-sine Pulse for 11 ms, No Change in Contact Position, Open, Shock Direction: A 10 m/s² |
| Half-sine Pulse for 11 ms, No Change in Contact Position, Closed, Shock Direction: A 20 m/s² | |
| Half-sine Pulse for 11 ms, No Change in Contact Position, Closed, Shock Direction: B1 15 m/s² | |
| Half-sine Pulse for 11 ms, No Change in Contact Position, Closed, Shock Direction: B2 10 m/s² | |
| Half-sine Pulse for 11 ms, No Change in Contact Position, Closed, Shock Direction: C1 20 m/s² | |
| Half-sine Pulse for 11 ms, No Change in Contact Position, Closed, Shock Direction: C2 14 m/s² | |
| Half-sine Pulse for 11 ms, No Change in Contact Position, Open, Shock Direction: B1 5 m/s² | |
| Half-sine Pulse for 11 ms, No Change in Contact Position, Open, Shock Direction: B2 10 m/s² | |
| Half-sine Pulse for 11 ms, No Change in Contact Position, Open, Shock Direction: C1 8 m/s² | |
| Half-sine Pulse for 11 ms, No Change in Contact Position, Open, Shock Direction: C2 8 m/s² | |
| RoHS Status: | Following EU Directive 2011/65/EU |
| |
| CB Certificate: | CB_SE_66833A1 |
| CCC Certificate: | CCC_2012010304558126 |
| CCC_2006010304174454 | |
| CQC Certificate: | CQC2012010304558126 |
| CSA Certificate: | CSA_1041746 |
| cUR Certificate: | UL_20140915-E252354_4_2 |
| Declaration of Conformity - CCC: | 2020980303000256 |
| Declaration of Conformity - CE: | 1SBD250808U1000 |
| Environmental Information: | 1SBD250127E1002 |
| GOST Certificate: | GOST_POCCFRME77B07174 |
| Instructions and Manuals: | 1SBC101006M5501 |
| RoHS Information: | 1SBD250808U1000 |
| UL Certificate: | UL_20140915-E252354_4_2 |
| UL Listing Card: | E252354 |
| |
| Package Level 1 Units: | 1 piece |
| Package Level 1 Width: | 86 mm |
| Package Level 1 Depth / Length: | 141 mm |
| Package Level 1 Height: | 51 mm |
| Package Level 1 Gross Weight: | 0.52 kg |
| Package Level 1 EAN: | 3471522361813 |
| Package Level 2 Units: | box 28 piece |
| Package Level 2 Gross Weight: | 14.56 kg |
| |
| Object Classification Code: | K |
| ETIM 4: | EC000196 - Contactor relay |
| ETIM 5: | EC000196 - Contactor relay |
| ETIM 6: | EC000196 - Contactor relay |
| ETIM 7: | EC000196 - Contactor relay |
| eClass: | V11.0 : 27371018 |
| UNSPSC: | 39121500 |