Article: BWU2689
Article: BWU2689
BWU2689 - AS-i Safety Input Module (M12), IP67
Configuration
Product description
The substructure module is not included in the scope of delivery.
Technical data
| Type | IP67, 4 x M12, Safety | |||||||||||||
| Housing | 4 x M12 | |||||||||||||
| Protection rating IP20: IP40: Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water. IP54:
Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.
Dust-tight, full protection against contact, protection against temporary immersion. | IP67 | |||||||||||||
| Inputs Safety, SIL 3, Cat. 4 | 1 x 2 channels | |||||||||||||
| Inputs digital, EDM An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes. | - | |||||||||||||
| Outputs Safety, SIL 3, cat. 4 | - | |||||||||||||
| Outputs digital | 2 x electronic | |||||||||||||
| Safety signal inputs | optoelectronic protective devices | |||||||||||||
| Input voltage (sensor supply) inputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, inputs shall not be connected to earth or to external potential. | out of AUX | |||||||||||||
| Output voltage (actuator supply) Electronic outputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from AS-i. The load circuit is powered externally as specified in the data sheet. | out of AUX | |||||||||||||
| Length of connector cable | unlimited | |||||||||||||
| PCB connection further connection options are available on request.
|
