IP20:
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.

IP40:

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

IP54:

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.

IP65:
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

IP67:

Dust-tight, full protection against contact, protection against temporary immersion.

Communication interface between fieldbus and gateway:

interfaces for standardized fieldbus systems in industrial automation.

PROFIBUS AS-i gateway: interface for a PROFIBUS fieldbus

PROFIBUS AS-i Basic gateway: interface for a PROFIBUS fieldbus

PROFIBUS AS-i IP65 gateway: interface for a PROFIBUS fieldbus
PROFINET AS-i gateway: interface for a PROFINET fieldbus

EtherNet/IP+ Modbus/TCP AS-i gateway: interface for an EtherNet/IP+ Modbus/TCP fieldbus

BACnet/IP AS-i gateway: interface for a BACnet/IP fieldbus
DeviceNet AS-i gateway: interface for a DeviceNet fieldbus
ControlLogix AS-i gateway: interface for the ControlLogix backplane

Compact-/MicroLogix AS-i gateway: interface for the Compact-/MicroLogix backplane
EtherCat AS-i gateway: interface for an EtherCat fieldbus

POWERLINK AS-i gateway: interface for an POWERLINK fieldbus
CC-Link AS-i gateway: interface for a CC-Link fieldbus
CANopen AS-i gateway: interface for a CANopen fieldbus
RS 485 Modbus AS-i gateway: interface for a Modbus/RTU, RS 485 fieldbus

Standard devices

Single Master:

1 AS-i network, 1 AS-i Master.

Double Master:

2 AS-i networks, 2 AS-i Masters.

Safety devices

Single Master:
1 AS-i network, 1 AS-i Master.

Double Master:
2 AS-i networks, 2 AS-i Masters.

Optional AS-i Safety coupling circuit:
2 AS-i networks, 1 AS-i Master.

yes, max. 4 A/AS-i network:
Cost-effective power for 2 AS-i networks with 1 power supply (optionally supply of multiple Single Gateways by 1 power supply).

Operation with short cable lengths with standard 24 V power supply possible.

no, max. 8 A/AS-i network, redundant supply:
1 AS-i power supply per AS-i network. Gateway is powered in normal operation from one of the two AS-i power supplies.

Should one AS-i power supply fail, switching to the other AS-i power supply allows all the diagnostics functions to be maintained and the unaffected AS-i network continues to operate.

no, max. 8 A/AS-i network:

1 AS-i power supply per AS-i network.

USB:

Access to AS-i Master and Safety Monitor with Bihl+Wiedemann proprietary software by using the USB interface.

Ethernet fieldbus
Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface.

Ethernet fieldbus + Ethernet diagnostic:

Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface or Ethernet fieldbus interface.

Ethernet diagnostic:

Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet diagnostic interface.

Ethernet diagnostic + Modbus TCP diagnostic:

Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software or via Modbus TCP by using the Ethernet diagnostic interface.

For a full-fledged Modbus TCP fieldbus interface use one of our Modbus TCP gateways in stainless steel or Modbus TCP gateways with integrated safety monitor.

Ethernet fieldbus + RS 232:

Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software by using the Ethernet fieldbus interface or by using an adapter cable via RS 232 interface.

RS 232:

Access to AS-i Master and Safety Monitor with Bihl+Wiedemann software by using an adapter cable via RS 232 interface.

The latest version of the device description file of the gateway/gateway with integrated safety monitor (GSD, GSDML, EDS, etc.) is available in the Downloads section of the respective device.

Detects whether the same address has been assigned to two AS-i slaves. Frequent error when using a handheld addressing device.

Checks the AS-i line for interference effects such as noise, external voltages, ...

Using a C-program offers the possibility to run mini-PLC functions with a gateway.

An externally connected relay (contactor) can be connected via a feedback loop to the Safety Monitor for monitoring purposes.